package common.v1

Get desktop application:
View/edit binary Protocol Buffers messages

Used in: evse.v1.EVSE

• CONNECTOR_STATUS_UNSPECIFIED = 0

• CONNECTOR_STATUS_AVAILABLE = 1

• CONNECTOR_STATUS_PREPARING = 2

• CONNECTOR_STATUS_CHARGING = 3

• CONNECTOR_STATUS_FINISHING = 4

• CONNECTOR_STATUS_UNAVAILABLE = 5

• CONNECTOR_STATUS_SUSPENDED_EVSE = 6

• CONNECTOR_STATUS_SUSPENDED_EV = 7

• CONNECTOR_STATUS_RESERVED = 8

• CONNECTOR_STATUS_FAULTED = 9

• CONNECTOR_TYPE_UNSPECIFIED = 0

• CONNECTOR_TYPE_TYPE1 = 1

• CONNECTOR_TYPE_TYPE2 = 2

• CONNECTOR_TYPE_SCHUKO = 3

• CONNECTOR_TYPE_CHADEMO = 4

Used in: Sample

• string unit = 1

• float value = 2

• string type = 1

• bool enabled = 2

• optional string language = 3

• optional I2c i2c = 4

• string type = 1

• string status = 2

• string error = 3

• optional Serial serial = 4

• optional Modbus modbus = 5

• ERROR_CODE_UNSPECIFIED = 0

• ERROR_CODE_OTHER = 1

• ERROR_CODE_CONNECTOR_LOCK_FAILURE = 3

• ERROR_CODE_EV_COMMUNICATION_ERROR = 4

• ERROR_CODE_GROUND_FAILURE = 5

• ERROR_CODE_HIGH_TEMPERATURE = 6

• ERROR_CODE_INTERNAL_ERROR = 7

• ERROR_CODE_LOCAL_LIST_CONFLICT = 8

• ERROR_CODE_OVER_CURRENT_FAILURE = 9

• ERROR_CODE_OVER_VOLTAGE = 10

• ERROR_CODE_POWER_METER_FAILURE = 11

• ERROR_CODE_POWER_SWITCH_FAILURE = 12

• ERROR_CODE_READER_FAILURE = 13

• ERROR_CODE_RESET_FAILURE = 14

• ERROR_CODE_UNDER_VOLTAGE = 15

• ERROR_CODE_WEAK_SIGNAL = 16

Used in: Display, configuration.v1.Display

• string address = 1

• int32 bus = 2

• string type = 1

• bool enabled = 2

• optional bool indicate_card_read = 3

• optional int32 data_pin = 4

• optional bool invert = 5

Used in: EVCC, PowerMeter, evse.v1.EVCC, evse.v1.PowerMeter

• string protocol = 1

• string device_address = 2

• string type = 1

• bool enabled = 2

• optional Modbus modbus = 3

• optional Spi spi = 4

Used in: charge_point.v1.ConnectionSettings, connection.v1.ConnectionSettings

• PROTOCOL_VERSION_UNSPECIFIED = 0

• PROTOCOL_VERSION_OCPP_16 = 1

• PROTOCOL_VERSION_OCPP_201 = 2

Used in: evse.v1.GetUsageForEVSEResponse

• optional Consumption consumption = 1

• string measureand = 2

• optional string phase = 3

• optional string location = 4

• optional string context = 5

• optional google.protobuf.Timestamp timestamp = 6

Used in: EVCC, evse.v1.EVCC

• string device_address = 1

• uint32 baud_rate = 2

• uint32 parity = 3

• uint32 data_bits = 4

• uint32 stop_bits = 5

Used in: PowerMeter, evse.v1.PowerMeter

• int32 chip_select = 1

• int32 bus = 2

• string type = 1

• bool enabled = 2

• optional string device_address = 3

• optional int32 reset_pin = 4