package protocol

Get desktop application:
View/edit binary Protocol Buffers messages

Used in: flexran_message

• optional flex_header header = 1

• optional string policy = 2

  The policy changes using YAML syntax in string format

• FLACRM_RM12 = 0

• FLACRM_RM20 = 1

• FLACRM_RM22 = 2

• FLACRM_RM30 = 3

• FLACRM_RM31 = 4

• FLACRM_NONE = 5

• FLBT_BCCH = 0

• FLBT_PCCH = 1

Flags for MAC Control Elements

• FLPCET_TA = 1

• FLPCET_DRX = 2

• FLPCET_CR = 4

• FLPCET_CA = 8

Used in: flex_enb_config_reply

• optional uint32 phy_cell_id = 1

  The PCI of this cell

• optional uint32 cell_id = 2

  The PLMN cell id of this cell

• optional uint32 pusch_hopping_offset = 3

  PUSCH resources in RBs for hopping

• optional uint32 hopping_mode = 4

  One of the FLHM_* enum values

• optional uint32 n_sb = 5

  The number of subbands

• optional uint32 phich_resource = 6

  The number of REGs used for PHICH

• optional uint32 phich_duration = 7

  One of the FLPR_* enum values

  One of the FLPD_* enum values

• optional uint32 init_nr_PDCCH_OFDM_sym = 8

  See TS 36.211, section 6.9

• optional flex_si_config si_config = 9

  The SI configuration

• optional uint32 dl_bandwidth = 10

  The DL transmission bandwidth in RBs

• optional uint32 ul_bandwidth = 11

  The UL transmission bandwidth in RBs

• optional uint32 ul_cyclic_prefix_length = 13

  One of the FLUCPL_* enum values

• optional uint32 dl_cyclic_prefix_length = 14

  One of the FLDCPL_* enum values

• optional uint32 antenna_ports_count = 15

  Number of cell specific antenna ports

• optional uint32 duplex_mode = 16

  One of the FLDM_* enum values

• optional uint32 subframe_assignment = 17

  DL/UL subframe assignment. TDD only

• optional uint32 special_subframe_patterns = 18

  TDD only. See TS 36.211, table 4.2.1

• repeated uint32 mbsfn_subframe_config_rfperiod = 19

  The MBSFN radio frame period (Optional)

• repeated uint32 mbsfn_subframe_config_rfoffset = 20

  The radio frame offset (Optional)

• repeated uint32 mbsfn_subframe_config_sfalloc = 21

  Bitmap indicating the MBSFN subframes (Optional)

• optional uint32 prach_config_index = 22

  See TS 36.211, section 5.7.1

• optional uint32 prach_freq_offset = 23

  See TS 36.211, section 5.7.1

• optional uint32 ra_response_window_size = 24

  The duration of the RA response window in SF

• optional uint32 mac_contention_resolution_timer = 25

  Timer for RA

• optional uint32 max_HARQ_Msg3Tx = 26

  See TS 36.321

• optional uint32 n1PUCCH_AN = 27

  See TS 36.213, section 10.1

• optional uint32 deltaPUCCH_shift = 28

  See TS 36.211, section 5.4

• optional uint32 nRB_cqi = 29

  See TS 36.211, section 5.4

• optional uint32 srs_subframe_config = 30

  See TS 36.211, table 5.5.3.3-1 and 2

• optional uint32 srs_bw_config = 31

  See TS 36.211, section 5.5.3.2

• optional uint32 srs_mac_up_pts = 32

  Boolean value. See TS 36.211, section 5.5.3.2. TDD only

• optional uint32 enable_64QAM = 33

  One of the FLEQ_* enum values

• optional uint32 carrier_index = 34

  Carrier component index

The full statistics report for a specific cell

Used in: flex_stats_reply

• optional uint32 carrier_index = 1

• optional uint32 flags = 2

• optional flex_noise_interference_report noise_inter_report = 3

Used in: flex_stats_request

• repeated uint32 cell = 1

• optional uint32 flags = 2

Flags for cell statistics

• FLCST_NOISE_INTERFERENCE = 1

Used in: flex_stats_request

• optional flex_stats_report_freq report_frequency = 1

• optional uint32 sf = 2

• optional uint32 cell_report_flags = 3

• optional uint32 ue_report_flags = 4

Used in: flexran_message

• optional flex_header header = 1

• optional uint32 delegation_type = 2

  Bitmap of FLCDT_* flags

• optional bytes payload = 3

  Byte array of shared lib containing the delegated functions

• optional string name = 4

  The delegated functions names ordered based on bitmap flags

• FLCDT_MAC_DL_UE_SCHEDULER = 1

  DL UE scheduler delegation

Used in: flex_ue_config

• optional uint32 cqi_action = 1

  Indicats if CQI changed or released.

• optional uint32 cqi_sched_interval = 2

  One of the FLSRA_* enum values

  CQI scheduling interval in SF

• optional uint32 ri_sched_interval = 3

  RI scheduling interval in SF

CSI type A12

Used in: flex_dl_csi

• repeated uint32 wb_cqi = 1

• repeated uint32 sb_pmi = 2

CSI type A20

Used in: flex_dl_csi

• optional uint32 wb_cqi = 1

• optional uint32 sb_cqi = 2

• repeated uint32 sb_list = 3

CSI type A22

Used in: flex_dl_csi

• repeated uint32 wb_cqi = 1

• repeated uint32 sb_cqi = 2

• optional uint32 wb_pmi = 3

• optional uint32 sb_pmi = 4

• repeated uint32 sb_list = 5

CSI type A30

Used in: flex_dl_csi

• optional uint32 wb_cqi = 1

• repeated uint32 sb_cqi = 2

CSI type A31

Used in: flex_dl_csi

• repeated uint32 wb_cqi = 1

• repeated flex_msb_cqi sb_cqi = 2

• optional uint32 wb_pmi = 3

CSI type P10

Used in: flex_dl_csi

• optional uint32 wb_cqi = 1

CSI type P11

Used in: flex_dl_csi

• repeated uint32 wb_cqi = 1

• optional uint32 wb_pmi = 2

CSI type P20

Used in: flex_dl_csi

• optional uint32 wb_cqi = 1

• optional uint32 sb_cqi = 2

• optional uint32 bandwidth_part_index = 3

• optional uint32 sb_index = 4

CSI type P21

Used in: flex_dl_csi

• repeated uint32 wb_cqi = 1

• optional uint32 wb_pmi = 2

• repeated uint32 sb_cqi = 3

• optional uint32 badwidth_part_index = 4

• optional uint32 sb_index = 5

Types of DL CSI reports

Used in: flex_dl_csi

• FLCSIT_P10 = 0

• FLCSIT_P11 = 1

• FLCSIT_P20 = 2

• FLCSIT_P21 = 3

• FLCSIT_A12 = 4

• FLCSIT_A22 = 5

• FLCSIT_A20 = 6

• FLCSIT_A30 = 7

• FLCSIT_A31 = 8

• FLDCIF_1 = 0

• FLDCIF_1A = 1

• FLDCIF_1B = 2

• FLDCIF_1C = 3

• FLDCIF_1D = 4

• FLDCIF_2 = 5

• FLDCIF_2A = 6

• FLDCIF_2B = 7

• FLDCIF_3 = 8

• FLDCIF_3A = 9

Used in: flex_dl_mac_config

• optional uint32 type = 1

  The FLBT_* values

• optional uint32 index = 2

  Index of the broadcast message:

• optional flex_dl_dci broad_dci = 3

  0 - SIB1, 1..31 - Six, 32..63 - PCCH (PCCH index obtained from flex_paging_info)

• optional uint32 carrier_index = 4

  Index of the carrier for broadcast

The full DL CQI report for all CC of a UE

Used in: flex_ue_stats_report

• optional uint32 sfn_sn = 1

• repeated flex_dl_csi csi_report = 2

The CSI report of the UE for a specific servCellIndex

Used in: flex_dl_cqi_report

• optional uint32 serv_cell_index = 1

• optional uint32 ri = 2

• optional flex_csi_type type = 3

• oneof report

  • flex_csi_p10 p10csi = 4

  • flex_csi_p11 p11csi = 5

  • flex_csi_p20 p20csi = 6

  • flex_csi_p21 p21csi = 7

  • flex_csi_a12 a12csi = 8

  • flex_csi_a22 a22csi = 9

  • flex_csi_a20 a20csi = 10

  • flex_csi_a30 a30csi = 11

  • flex_csi_a31 a31csi = 12

• FLDCPL_NORMAL = 0

• FLDCPL_EXTENDED = 1

Used in: flex_dl_mac_config

• optional uint32 rnti = 1

• optional flex_dl_dci dl_dci = 2

• repeated uint32 ce_bitmap = 3

  list of 2 MAC CEs, one for each TB

• repeated flex_rlc_pdu rlc_pdu = 4

  list of parameters for the creation of RLC PDUs. One for each lcid

• optional uint32 serv_cell_index = 5

• optional uint32 act_deact_ce = 6

  Hex content of MAC CE for Activation/Deactivation in CA

Used in: flex_dl_broadcast, flex_dl_data, flex_dl_rar

• optional uint32 rnti = 1

• optional uint32 res_alloc = 2

  Type of resource allocation

• optional uint32 rb_bitmap = 3

  Bitmap for RB allocation

• optional uint32 rb_shift = 4

  See TS 36.214, section 7.1.6.2

• repeated uint32 tbs_size = 5

  The size of each TBS

• repeated uint32 mcs = 6

  The MCS of each TB

• repeated uint32 ndi = 7

  New data indicator of each TB

• repeated uint32 rv = 8

  Redundancy version of each TB

• optional uint32 cce_index = 9

  CCE index used to send the DCI

• optional uint32 aggr_level = 10

• optional uint32 precoding_info = 11

  2 antenna ports:0..6,

• optional uint32 format = 12

  4 antenna ports:0..50

  DCI format. A FLDCIF_* value

• optional uint32 tpc = 13

  TS 36.213, sec 5.1.1.1

• optional uint32 harq_process = 14

  HARQ process ID

• optional uint32 dai = 15

  TDD only

• optional uint32 vrb_format = 16

  One of the FLVRBF_* values

• optional uint32 tb_swap = 17

  Boolean. TB to codeword swap flag

• optional uint32 sps_release = 18

  Flag value

• optional uint32 pdcch_order = 19

• optional uint32 preamble_index = 20

  Only valid if pdcch_order = 1

• optional uint32 prach_mask_index = 21

  Only valid if pdcch_order = 1

• optional uint32 n_gap = 22

  One of the FLNGV_* values

• optional uint32 tbs_idx = 23

  The TBS index for Format 1A

• optional uint32 dl_power_offset = 24

  For format 1D

• optional uint32 pdcch_power_offset = 25

  DL PDCCH power boosting in dB

• optional uint32 cif_present = 26

  Boolean. Indication of CIF field

• optional uint32 cif = 27

  CIF for cross-carrier scheduling

Used in: flex_sf_trigger

• optional uint32 rnti = 1

• optional uint32 harq_process_id = 2

• repeated uint32 harq_status = 3

• optional uint32 serv_cell_index = 4

Used in: flexran_message

• optional flex_header header = 1

• optional uint32 sfn_sf = 2

• repeated flex_dl_data dl_ue_data = 3

• repeated flex_dl_rar dl_rar = 4

• repeated flex_dl_broadcast dl_broadcast = 5

• repeated flex_pdcch_ofdm_sym_count ofdm_sym = 6

  OFDM symbol count for each CC

Body of the RAR scheduler configuration

Used in: flex_dl_mac_config

• optional uint32 rnti = 1

• optional uint32 grant = 2

  The 20-bit UL grant. TS 36.213, sec 6.2

• optional flex_dl_dci rar_dci = 3

• optional uint32 carrier_index = 4

  The carrier index for the RAR

Used in: flex_ue_config

• optional uint32 on_duration_timer = 1

  Timer in SF. See TS 36.321

• optional uint32 drx_inactivity_timer = 2

  Timer in SF. See TS 36.321

• optional uint32 drx_retransmission_timer = 3

  Timer in SF. See TS 36.321

• optional uint32 long_drx_cycle = 4

  In SF. See TS 36.321

• optional uint32 long_drx_cycle_start_offset = 5

  See TS 36.321

• optional uint32 short_drx_cycle = 6

  In SF

• optional uint32 drx_short_cycle_timer = 7

  Timer in subframes. See TS 36.321

• FLDM_TDD = 0

• FLDM_FDD = 1

Used in: flexran_message

• optional flex_header header = 1

(message has no fields)

Used in: flexran_message

• optional flex_header header = 1

Extensions of the echo request and reply messages for carrying a latency value in ms

(message has no fields)

Used in: flexran_message

• optional flex_header header = 1

• optional uint32 eNB_id = 2

  Unique id to distinguish the eNB

• repeated flex_cell_config cell_config = 3

eNB configuration messages

Used in: flexran_message

• optional flex_header header = 1

• FLHS_ACK = 0

• FLHS_NACK = 1

• FLHS_DTX = 2

Used in: flex_agent_reconfiguration, flex_control_delegation, flex_dl_mac_config, flex_echo_reply, flex_echo_request, flex_enb_config_reply, flex_enb_config_request, flex_hello, flex_lc_config_reply, flex_lc_config_request, flex_sf_trigger, flex_stats_reply, flex_stats_request, flex_ue_config_reply, flex_ue_config_request, flex_ue_state_change, flex_ul_sr_info

• optional uint32 version = 1

• optional uint32 type = 2

• optional uint32 xid = 4

Used in: flexran_message

• optional flex_header header = 1

• FLHM_INTER = 0

• FLHM_INTERINTRA = 1

Used in: flex_lc_ue_config

• optional uint32 lcid = 1

  The logical channel id

• optional uint32 lcg = 2

  The logical channel group (0..3) the LC is mapped to

• optional uint32 direction = 3

  The LC direction. One of the FLLCD_* enum values

• optional uint32 qos_bearer_type = 4

  GBR or NGBR bearer. One of the FLQBT_* enum values

• optional uint32 qci = 5

  The QCI defined in TS 23.203, coded as defined in TS 36.413

• optional uint64 e_RAB_max_bitrate_UL = 6

  One less than the actual QCI value

  In bps (GBR only)

• optional uint64 e_RAB_max_bitrate_DL = 7

  In bps (GBR only)

• optional uint64 e_RAB_guaranteed_bitrate_UL = 8

  In bps (GBR only)

• optional uint64 e_RAB_guaranteed_bitrate_DL = 9

  In bps (GBR only)

Used in: flexran_message

• optional flex_header header = 1

• repeated flex_lc_ue_config lc_ue_config = 2

Used in: flexran_message

• optional flex_header header = 1

• FLLCD_UL = 0

• FLLCD_DL = 1

• FLLCD_BOTH = 2

Used in: flex_lc_config_reply

• optional uint32 rnti = 1

• repeated flex_lc_config lc_config = 2

  A list of LC configurations for the given UE

• FLMGCP_GP1 = 0

• FLMGCP_GP2 = 1

• FLMGCP_OFF = 2

The CQI for the M-preffered subband

Used in: flex_csi_a31

• repeated uint32 sb_cqi = 1

• FLNGV_1 = 0

• FLNGV_2 = 1

The UL noise and interference report for a UE

Used in: flex_cell_stats_report

• optional uint32 sfn_sf = 1

• optional uint32 rip = 2

• optional uint32 tnp = 3

• optional int32 p0_nominal_pucch = 4

Report for the paging buffer status

Used in: flex_ue_stats_report

• repeated flex_paging_info paging_info = 1

Paging message info

Used in: flex_paging_buffer_report

• optional uint32 paging_index = 1

• optional uint32 paging_message_size = 2

• optional uint32 paging_subframe = 3

• optional uint32 carrier_index = 4

Used in: flex_dl_mac_config

• optional uint32 carrier_index = 1

• optional uint32 num_pdcch_ofdm_symbols = 2

• FLPD_NORMAL = 0

• FLPD_EXTENDED = 1

• FLPR_ONE_SIXTH = 0

• FLPR_HALF = 1

• FLPR_ONE = 2

• FLPR_TWO = 3

Used in: flex_ul_cqi_report

• optional int32 p0_pucch_dbm = 1

• optional uint32 serv_cell_index = 2

• optional uint32 p0_pucch_updated = 3

• FLEQ_MOD_16QAM = 0

• FLEQ_MOD_64QAM = 1

• FLQBT_NON_GBR = 0

• FLQBT_GBR = 1

• FLRS_OK = 0

• FLRS_NOT_OK = 1

• FLRS_NOT_VALID = 2

RLC buffer status for a specific logical channel of a UE

Used in: flex_ue_stats_report

• optional uint32 lc_id = 1

• optional uint32 tx_queue_size = 2

• optional uint32 tx_queue_hol_delay = 3

• optional uint32 retransmission_queue_size = 4

• optional uint32 retransmission_queue_hol_delay = 5

• optional uint32 status_pdu_size = 6

Used in: flex_dl_data

• repeated flex_rlc_pdu_tb rlc_pdu_tb = 1

  list of parameters for the creation of RLC PDUs. One for each TB

Used in: flex_rlc_pdu

• optional uint32 logical_channel_id = 1

• optional uint32 size = 2

  Maximum RLC PDU to be created in bytes

Used in: flex_ue_config

• optional uint32 carrier_index = 1

  Id of the carrier component

• optional uint32 scell_index = 2

  Index of this Scell (RRC SCellIndex)

• optional uint32 use_ccs = 3

  Boolean value. Indicates if cross-carrier scheduling

• optional uint32 sched_cell_index = 4

  is used by this SCell

  Index of the cell responsible for scheduling

• optional uint32 pdsch_start = 5

  this SCell if cross-carrier scheduling is enabled

  Starting OFDM symbol of PDSCH data region for this SCell

• FLSRA_SETUP = 0

• FLSRA_RELEASE = 1

Used in: flexran_message

• optional flex_header header = 1

• optional uint32 sfn_sf = 2

• repeated flex_dl_info dl_info = 3

• repeated flex_ul_info ul_info = 4

Used in: flex_cell_config

• optional uint32 sfn = 1

• optional uint32 sib1_length = 2

  The length of SIB1 in bytes

• optional uint32 si_window_length = 3

  The scheduling window for all SIs in SF

• repeated flex_si_message si_message = 4

  List of SI messages to be sent.

Used in: flex_si_config

• optional uint32 periodicity = 1

  Periodicity of SI msg in radio frames

• optional uint32 length = 2

  The length of the SI message in bytes

Used in: flex_ue_config

• optional uint32 semi_persistent_sched_interval_UL = 1

  SPS UL scheduling interval in SF

• optional uint32 semi_persistent_sched_interval_DL = 2

  SPS DL scheduling interval in SF

• optional uint32 num_of_conf_sps_proc = 3

  Number of SPS HARQ processes. See TS 36.321

• repeated uint32 n1_PUCCH_AN_persistent_element = 4

  See TS36.213. Ignored when config is used

• optional uint32 implicit_release_after = 5

  as part of FLPT_SET_UE_CONFIG

  number of empty transmissions before release of SPS

Used in: flex_ue_config

• optional uint32 sr_action = 1

  Indicates if SR config should be changed or released

• optional uint32 sched_interval = 2

  One of the FLSRA_* enum values

  SR scheduling interval in SF

• optional uint32 dsr_trans_max = 3

  See TS 36.213

Used in: flexran_message

• optional flex_header header = 1

• repeated flex_ue_stats_report ue_report = 2

• repeated flex_cell_stats_report cell_report = 3

Report frequency for the requested statistics

Used in: flex_complete_stats_request

• FLSRF_ONCE = 0

• FLSRF_PERIODICAL = 1

• FLSRF_CONTINUOUS = 2

• FLSRF_OFF = 3

Used in: flexran_message

• optional flex_header header = 1

• optional flex_stats_type type = 2

• oneof body

  • flex_complete_stats_request complete_stats_request = 3

  • flex_cell_stats_request cell_stats_request = 4

  • flex_ue_stats_request ue_stats_request = 5

Types of statistics requested by the controller

Used in: flex_stats_request

• FLST_COMPLETE_STATS = 0

• FLST_CELL_STATS = 1

• FLST_UE_STATS = 2

• FLTANFM_BUNDLING = 0

• FLTANFM_MULTIPLEXING = 1

• FLPT_HELLO = 0

  Discovery and maintenance messages

• FLPT_ECHO_REQUEST = 1

• FLPT_ECHO_REPLY = 2

• FLPT_STATS_REQUEST = 3

  Statistics and measurement messages

• FLPT_STATS_REPLY = 4

• FLPT_SF_TRIGGER = 5

  Time indication messages

• FLPT_UL_SR_INFO = 6

  Asynchronous messages

• FLPT_GET_ENB_CONFIG_REQUEST = 7

  eNB configuration messages

• FLPT_GET_ENB_CONFIG_REPLY = 8

• FLPT_GET_UE_CONFIG_REQUEST = 9

• FLPT_GET_UE_CONFIG_REPLY = 10

• FLPT_GET_LC_CONFIG_REQUEST = 11

• FLPT_GET_LC_CONFIG_REPLY = 12

• FLPT_DL_MAC_CONFIG = 13

  Controller command messages

• FLPT_UE_STATE_CHANGE = 14

  UE state change messages

• FLPT_DELEGATE_CONTROL = 15

  Control delegation messages

• FLPT_RECONFIGURE_AGENT = 16

Used in: flex_ue_config

• optional uint32 half_duplex = 1

  Boolean value. Only half duplex support. FDD operation

• optional uint32 intra_SF_hopping = 2

  Support for intra-subframe hopping. Boolean value

• optional uint32 type2_sb_1 = 3

  Support for type 2 hopping with n_sb > 1

• optional uint32 ue_category = 4

• optional uint32 res_alloc_type1 = 5

  Boolean value. UE support for resource allocation type 1

Used in: flex_ue_config_reply, flex_ue_state_change

• optional uint32 rnti = 1

• optional flex_drx_config drx_config = 2

  The DRX configuration (Optional)

• optional uint32 time_alignment_timer = 3

  Timer in SF. Control the synchronization

• optional uint32 meas_gap_config_pattern = 4

  status of the UE, not the actual advance procedure See TS 36.321

  Measurement gap configuration.

• optional uint32 meas_gap_config_sf_offset = 5

  One of the FLMGCP_* enum values See TS 36.133

  Measurement gap offset if applicable

• optional flex_sps_config sps_config = 6

  The SPS configuration (Optional)

• optional flex_sr_config sr_config = 7

  The SR configuration (Optional)

• optional flex_cqi_config cqi_config = 8

  The CQI configuration (Optional)

• optional uint32 transmission_mode = 9

  The UE transmission mode

• optional uint64 ue_aggregated_max_bitrate_UL = 10

  Aggregated bit-rate of non-gbr bearer

• optional uint64 ue_aggregated_max_bitrate_DL = 11

  per UE. See TS 36.413

  Aggregated bit-rate of non-gbr bearer

• optional flex_ue_capabilities capabilities = 12

  per UE. See TS 36.413

• optional uint32 ue_transmission_antenna = 13

  One of the FLUTA_* enum values

• optional uint32 tti_bundling = 14

  Boolean value. See TS 36.321

• optional uint32 max_HARQ_tx = 15

  The max HARQ retransmission for UL

• optional uint32 beta_offset_ACK_index = 16

  See TS 36.213

• optional uint32 beta_offset_RI_index = 17

  See TS 36.213

• optional uint32 beta_offset_CQI_index = 18

  See TS 36.213

• optional uint32 ack_nack_simultaneous_trans = 19

  Boolean. See TS 36.213

• optional uint32 simultaneous_ack_nack_cqi = 20

  Boolean. See TS 36.213

• optional uint32 aperiodic_cqi_rep_mode = 21

  One of the FLACRM_* enum values

• optional uint32 tdd_ack_nack_feedback = 22

  One of the FLTANFM_* enum values

• optional uint32 ack_nack_repetition_factor = 23

  See TS 36.213, section 10.1

• optional uint32 extended_bsr_size = 24

  Boolean for extended BSR size

• optional uint32 ca_support = 25

  Boolean. Support for carrier aggregation

• optional uint32 cross_carrier_sched_support = 26

  Boolean value

• optional uint32 pcell_carrier_index = 27

  Index of primary cell

• repeated flex_scell_config scell_config = 28

  Secondary cells configuration

• optional uint32 scell_deactivation_timer = 29

  Deactivation timer for secondary cell

Used in: flexran_message

• optional flex_header header = 1

• repeated flex_ue_config ue_config = 2

Used in: flexran_message

• optional flex_header header = 1

Used in: flexran_message

• optional flex_header header = 1

• optional uint32 type = 2

  One of the FLUESC_* values

• optional flex_ue_config config = 3

  Body of the message (based on type)

• FLUESC_UPDATED = 0

• FLUESC_ACTIVATED = 1

• FLUESC_DEACTIVATED = 2

• FLUESC_MOVED = 3

Statistics report for a specific UE

Used in: flex_stats_reply

• optional uint32 rnti = 1

• optional uint32 flags = 2

• repeated uint32 bsr = 3

• optional uint32 phr = 4

• repeated flex_rlc_bsr rlc_report = 5

• optional uint32 pending_mac_ces = 6

• optional flex_dl_cqi_report dl_cqi_report = 7

• optional flex_paging_buffer_report pbr = 8

• optional flex_ul_cqi_report ul_cqi_report = 9

Used in: flex_stats_request

• repeated uint32 rnti = 1

• optional uint32 flags = 2

Flags for UE-related statistics

• FLUST_BSR = 1

• FLUST_PRH = 2

• FLUST_RLC_BS = 4

• FLUST_MAC_CE_BS = 8

• FLUST_DL_CQI = 16

• FLUST_PBS = 32

• FLUST_UL_CQI = 64

  To be extended with more types of stats

• FLUTA_NONE = 0

• FLUTA_OPEN_LOOP = 1

• FLUTA_CLOSED_LOOP = 2

UL CQI report for a specific UE for a given report type

Used in: flex_ul_cqi_report

• optional flex_ul_cqi_type type = 1

• repeated uint32 sinr = 2

• optional uint32 serv_cell_index = 3

Full UL CQI report for a specific UE

Used in: flex_ue_stats_report

• optional uint32 sfn_sn = 1

• repeated flex_ul_cqi cqi_meas = 2

• repeated flex_pucch_dbm pucch_dbm = 3

The type of UL CQI

Used in: flex_ul_cqi

• FLUCT_SRS = 0

• FLUCT_PUSCH = 1

• FLUCT_PUCCH_1 = 2

• FLUCT_PUCCH_2 = 3

• FLUCT_PRACH = 4

• FLUCPL_NORMAL = 0

• FLUCPL_EXTENDED = 1

Used in: flex_sf_trigger

• optional uint32 rnti = 1

• repeated uint32 ul_reception = 2

• optional uint32 reception_status = 3

• optional uint32 tpc = 4

• optional uint32 serv_cell_index = 5

Used in: flexran_message

• optional flex_header header = 1

• optional uint32 sfn_sf = 2

• repeated uint32 rnti = 3

• FLVRBF_LOCALIZED = 0

• FLVRBF_DISTRIBUTED = 1

Used in: flexran_message

• NOT_SET = 0

  option allow_alias = true;

• INITIATING_MESSAGE = 1

• SUCCESSFUL_OUTCOME = 2

• UNSUCCESSFUL_OUTCOME = 3

• NO_ERR = 0

  option allow_alias = true; message errors

• MSG_DEQUEUING = -1

• MSG_ENQUEUING = -2

• MSG_DECODING = -3

• MSG_ENCODING = -4

• MSG_BUILD = -5

• MSG_NOT_SUPPORTED = -6

• MSG_NOT_HANDLED = -7

• MSG_NOT_VALIDATED = -8

• MSG_OUT_DATED = -9

• UNEXPECTED = -100

  other erros

• optional flexran_direction msg_dir = 100

• oneof msg

  • flex_hello hello_msg = 1

  • flex_echo_request echo_request_msg = 2

  • flex_echo_reply echo_reply_msg = 3

  • flex_stats_request stats_request_msg = 4

  • flex_stats_reply stats_reply_msg = 5

  • flex_sf_trigger sf_trigger_msg = 6

  • flex_ul_sr_info ul_sr_info_msg = 7

  • flex_enb_config_request enb_config_request_msg = 8

  • flex_enb_config_reply enb_config_reply_msg = 9

  • flex_ue_config_request ue_config_request_msg = 10

  • flex_ue_config_reply ue_config_reply_msg = 11

  • flex_lc_config_request lc_config_request_msg = 12

  • flex_lc_config_reply lc_config_reply_msg = 13

  • flex_dl_mac_config dl_mac_config_msg = 14

  • flex_ue_state_change ue_state_change_msg = 15

  • flex_control_delegation control_delegation_msg = 16

  • flex_agent_reconfiguration agent_reconfiguration_msg = 17