Default package

Get desktop application:
View/edit binary Protocol Buffers messages

Used in: Print

• repeated AmsSingle ams = 1

• optional string ams_exist_bits = 2

• optional string tray_exist_bits = 3

• optional string tray_is_bbl_bits = 4

• optional string tray_tar = 5

• optional string tray_now = 6

• optional string tray_pre = 7

• optional string tray_read_done_bits = 8

• optional string tray_reading_bits = 9

• optional int32 version = 10

• optional bool insert_flag = 11

• optional bool power_on_flag = 12

Used in: Ams

• optional string id = 1

• optional string humidity = 2

• optional string temp = 3

• repeated Tray tray = 4

• optional Print print = 1

• optional Pushing pushing = 2

• optional System system = 3

• optional Info info = 4

Used in: UpgradeState

(message has no fields)

(message has no fields)

Used in: Print

(message has no fields)

Used in: BambuMessage

• optional string command = 1

• optional string sequence_id = 2

• repeated Module module = 3

• optional string result = 4

• optional string reason = 5

Used in: Print

• optional string ipcam_dev = 1

• optional string ipcam_record = 2

• optional string timelapse = 3

• optional string resolution = 4

• optional int32 mode_bits = 5

• optional string rtsp_url = 6

• optional string tutk_server = 7

Used in: Print

• optional string node = 1

• optional string mode = 2

Used in: Info

• optional string name = 1

• optional string project_name = 2

• optional string sw_ver = 3

• optional string hw_ver = 4

• optional string sn = 5

• optional int32 flag = 6

Used in: Print

• optional int32 conf = 1

• repeated NetInfo info = 2

Used in: Net

• optional int64 ip = 1

• optional int64 mask = 2

Used in: Print

• optional bool ahb = 1

• optional bool rfid = 2

• optional int32 version = 3

• optional bool ext = 4

Used in: BambuMessage

• optional UpgradeState upgrade_state = 1

• optional Upload upload = 2

• optional double nozzle_temper = 3

• optional double nozzle_target_temper = 4

• optional double bed_temper = 5

• optional double bed_target_temper = 6

• optional double chamber_temper = 7

• optional string mc_print_stage = 8

• optional string heatbreak_fan_speed = 9

• optional string cooling_fan_speed = 10

• optional string big_fan1_speed = 11

• optional string big_fan2_speed = 12

• optional int32 mc_percent = 13

• optional int32 mc_remaining_time = 14

• optional int32 ams_status = 15

• optional int32 ams_rfid_status = 16

• optional int32 hw_switch_state = 17

• optional int32 spd_mag = 18

• optional int32 spd_lvl = 19

• optional int32 print_error = 20

• optional string lifecycle = 21

• optional string wifi_signal = 22

• optional string gcode_state = 23

• optional string gcode_file_prepare_percent = 24

• optional int32 queue_number = 25

• optional int32 queue_total = 26

• optional int32 queue_est = 27

• optional int32 queue_sts = 28

• optional string project_id = 29

• optional string profile_id = 30

• optional string task_id = 31

• optional string subtask_id = 32

• optional string subtask_name = 33

• optional string gcode_file = 34

• repeated int32 stg = 35

• optional int32 stg_cur = 36

• optional string print_type = 37

• optional int32 home_flag = 38

• optional string mc_print_line_number = 39

• optional int32 mc_print_sub_stage = 40

• optional bool sdcard = 41

• optional bool force_upgrade = 42

• optional string mess_production_state = 43

• optional int32 layer_num = 44

• optional int32 total_layer_num = 45

• repeated int32 s_obj = 46

• repeated int32 filam_bak = 47

• optional int32 fan_gear = 48

• optional string nozzle_diameter = 49

• optional string nozzle_type = 50

• repeated Hms hms = 51

• optional Online online = 52

• optional Ams ams = 53

• optional Ipcam ipcam = 54

• optional Tray vt_tray = 55

• repeated LightsReport lights_report = 56

• optional string command = 57

• optional int32 msg = 58

• optional string sequence_id = 59

• optional string param = 60

• optional string file = 61

• optional string url = 62

• optional string md5 = 63

• optional bool timelapse = 64

• optional string bed_type = 65

• optional bool bed_levelling = 66

• optional bool flow_cali = 67

• optional bool vibration_cali = 68

• optional bool layer_inspect = 69

• repeated int32 ams_mapping = 70

• optional bool use_ams = 71

• optional string reason = 72

• optional string result = 73

• optional int32 target = 74

• optional int32 curr_temp = 75

• optional int32 tar_temp = 76

• optional int32 ams_id = 77

• optional int32 tray_id = 78

• optional string tray_info_idx = 79

• optional string tray_color = 80

• optional int32 nozzle_temp_min = 81

• optional int32 nozzle_temp_max = 82

• optional string tray_type = 83

• optional bool aux_part_fan = 84

• optional int32 cali_version = 85

• optional int32 ctt = 86

• optional string fail_reason = 87

• optional string gcode_start_time = 88

  looks like timestamp

• optional string job_id = 89

• optional int32 maintain = 90

• optional string mc_print_error_code = 91

• optional Net net = 92

• optional int32 print_gcode_action = 93

• optional int32 print_real_action = 94

• optional Xcam xcam = 95

• optional string xcam_status = 96

Used in: BambuMessage

• optional string command = 1

• optional int32 push_target = 2

• optional int32 version = 3

• optional string sequence_id = 4

Used in: BambuMessage

• optional string sequence_id = 1

• optional string command = 2

• optional string led_node = 3

• optional string led_mode = 4

• optional int32 led_on_time = 5

• optional int32 led_off_time = 6

• optional int32 loop_times = 7

• optional int32 interval_time = 8

Used in: AmsSingle, Print

• optional string id = 1

• optional int32 remain = 2

• optional double k = 3

• optional double n = 4

• optional string tag_uid = 5

• optional string tray_id_name = 6

• optional string tray_info_idx = 7

• optional string tray_type = 8

• optional string tray_sub_brands = 9

• optional string tray_color = 10

• optional string tray_weight = 11

• optional string tray_diameter = 12

• optional string tray_temp = 13

• optional string tray_time = 14

• optional string bed_temp_type = 15

• optional string bed_temp = 16

• optional string nozzle_temp_max = 17

• optional string nozzle_temp_min = 18

• optional string xcam_info = 19

• optional string tray_uuid = 20

• optional int32 cali_idx = 21

• repeated string cols = 22

• optional string ctype = 23

• optional string drying_temp = 24

• optional string drying_time = 25

Used in: Print

• optional int32 sequence_id = 1

• optional string progress = 2

• optional string status = 3

• optional bool consistency_request = 4

• optional int32 dis_state = 5

• optional int32 err_code = 6

• optional bool force_upgrade = 7

• optional string message = 8

• optional string module = 9

• optional int32 new_version_state = 10

• optional int32 cur_state_code = 11

• repeated Empty new_ver_list = 12

• optional string ahb_new_version_number = 13

• optional string ams_new_version_number = 14

• optional string ext_new_version_number = 15

• optional int32 idx = 16

• optional string ota_new_version_number = 17

• optional string sn = 18

Used in: Print

• optional string status = 1

• optional int32 progress = 2

• optional string message = 3

• optional int32 file_size = 4

• optional int32 finish_size = 5

• optional string oss_url = 6

• optional int32 speed = 7

• optional string task_id = 8

• optional int32 time_remaining = 9

• optional string trouble_id = 10

Used in: Print

• optional bool allow_skip_parts = 1

• optional bool buildplate_marker_detector = 2

• optional bool first_layer_inspector = 3

• optional string halt_print_sensitivity = 4

• optional bool print_halt = 5

• optional bool printing_monitor = 6

• optional bool spaghetti_detector = 7