package KismetDatasource

Get desktop application:
View/edit binary Protocol Buffers messages

Close open device (Kismet->Driver) KDSCLOSEDATASOURCE

(message has no fields)

Configure source behavior (Kismet->Driver) KDSCONFIGURE

• optional SubChanset channel = 1

• optional SubChanhop hopping = 2

• optional SubSpecset spectrum = 3

Configuration update (Driver->Kismet) KDSCONFIGUREREORT

• required SubSuccess success = 1

• optional SubChanset channel = 2

• optional SubChanhop hopping = 3

• optional KismetExternal.MsgbusMessage message = 4

• optional string warning = 5

Packet payload (Driver->Kismet)

• optional SubGps gps = 1

• optional KismetExternal.MsgbusMessage message = 2

• optional SubPacket packet = 3

• optional SubSignal signal = 4

• optional SubSpectrum spectrum = 5

• optional string warning = 6

• optional SubJson json = 7

• optional SubBuffer buffer = 8

• optional double high_prec_time = 9

Fatal error (Driver->Kismet) KDSERRORREPORT

• required SubSuccess success = 1

• optional KismetExternal.MsgbusMessage message = 2

Interface list (Driver->Kismet) KDSINTERFACESREPORT

• required SubSuccess success = 1

• optional KismetExternal.MsgbusMessage message = 2

• repeated SubInterface interfaces = 3

Request interface list (Kismet->Driver)

(message has no fields)

Initiate a new datasource on a remote connection (Driver->Kismet) KDSNEWSOURCE

• required string definition = 1

• required string sourcetype = 2

• required string uuid = 3

Initiate opening an interface (Kismet->Driver) KDSOPENSOURCE

• required string definition = 1

Report success of opening a source, and all source data (Driver->Kismet) KDSOPENSOURCEREPORT

• required SubSuccess success = 1

• optional uint32 dlt = 2

• optional string capture_interface = 3

• optional SubChannels channels = 4

• optional SubChanset channel = 5

• optional SubChanhop hop_config = 6

• optional string hardware = 7

• optional KismetExternal.MsgbusMessage message = 8

• optional SubSpecset spectrum = 9

• optional string uuid = 10

• optional string warning = 11

Query if a driver can handle a definition (Kismet->Driver) KDSPROBESOURCE

• required string definition = 1

Respond to a probe (Driver->Kismet) KDSPROBESOURCEREPORT

• required SubSuccess success = 1

• optional KismetExternal.MsgbusMessage message = 2

• optional SubChannels channels = 3

• optional SubChanset channel = 4

• optional SubSpecset spectrum = 5

• optional string hardware = 6

Used in: DataReport

• required uint64 time_sec = 1

• required uint64 time_usec = 2

• required string type = 3

• required bytes buffer = 4

Channel hop commands

Used in: Configure, ConfigureReport, OpenSourceReport

• repeated string channels = 1

  Channels to hop over

• optional double rate = 2

  Hop rate

• optional bool shuffle = 3

  Shuffle

• optional uint32 shuffle_skip = 4

  Skip interval per shuffle

• optional uint32 offset = 5

  Offset for multiple devices on the same band

Multiple channels

Used in: OpenSourceReport, ProbeSourceReport

• repeated string channels = 1

Single channel

Used in: Configure, ConfigureReport, OpenSourceReport, ProbeSourceReport

• required string channel = 1

GPS data

Used in: DataReport, KismetLinuxBluetooth.LinuxBluetoothDataReport

• required double lat = 1

• required double lon = 2

• required double alt = 3

• required double speed = 4

• required double heading = 5

• required double precision = 6

• required uint32 fix = 7

• required uint64 time_sec = 8

• required uint64 time_usec = 9

• required string type = 10

• required string name = 11

• optional double high_prec_time = 12

Possible interface

Used in: InterfacesReport

• required string interface = 1

• required string flags = 2

• optional string hardware = 3

• optional string capinterface = 4

  Capture interface mapped below the virtual interface name, ie rtlXYZ-N or wlan0mon

Used in: DataReport

• required uint64 time_sec = 1

• required uint64 time_usec = 2

• required string type = 3

• required string json = 4

Packetized data

Used in: DataReport

• required uint64 time_sec = 1

• required uint64 time_usec = 2

• required uint32 dlt = 3

• required uint64 size = 4

• required bytes data = 5

• optional uint64 cap_size = 6

Signal metadata

Used in: DataReport, KismetLinuxBluetooth.LinuxBluetoothDataReport

• optional double signal_dbm = 1

• optional double noise_dbm = 2

• optional double signal_rssi = 3

• optional double noise_rssi = 4

• optional double freq_khz = 5

• optional string channel = 6

• optional double datarate = 7

Spectrum configuration

Used in: Configure, OpenSourceReport, ProbeSourceReport

• optional double start_mhz = 1

• optional double end_mhz = 2

• optional double samples_per_bucket = 3

• optional double bucket_width_hz = 4

• optional bool enable_amp = 5

• optional uint64 if_amp = 6

• optional uint64 baseband_amp = 7

Spectrum report

Used in: DataReport

• optional uint64 time_sec = 1

• optional uint64 time_usec = 2

• optional double start_mhz = 3

• optional double end_mhz = 4

• optional double bucket_width_hz = 5

• repeated int32 data = 6

Command success

Used in: ConfigureReport, ErrorReport, InterfacesReport, OpenSourceReport, ProbeSourceReport

• required bool success = 1

• required uint32 seqno = 2

Non-fatal warning (Driver->Kismet) KDSWARNINGREPORT

• required string warning = 1