package chromeos_update_engine

Get desktop application:
View/edit binary Protocol Buffers messages

Definition has been duplicated from $ANDROID_BUILD_TOP/build/tools/releasetools/ota_metadata.proto. Keep in sync.

Used in: ApexMetadata, DeltaArchiveManifest

• optional string package_name = 1

• optional int64 version = 2

• optional bool is_compressed = 3

• optional int64 decompressed_size = 4

Definition has been duplicated from $ANDROID_BUILD_TOP/build/tools/releasetools/ota_metadata.proto. Keep in sync.

• repeated ApexInfo apex_info = 1

Hints to VAB snapshot to skip writing some blocks if these blocks are identical to the ones on the source image. The src & dst extents for each CowMergeOperation should be contiguous, and they're a subset of an OTA InstallOperation. During merge time, we need to follow the pre-computed sequence to avoid read after write, similar to the inplace update schema.

Used in: PartitionUpdate

• optional CowMergeOperation.Type type = 1

• optional Extent src_extent = 2

• optional Extent dst_extent = 3

• optional uint32 src_offset = 4

  For COW_XOR, source location might be unaligned, so this field is in range [0, block_size), representing how much should the src_extent shift toward larger block number. If this field is non-zero, then src_extent will include 1 extra block in the end, as the merge op actually references the first |src_offset| bytes of that extra block. For example, if |dst_extent| is [10, 15], |src_offset| is 500, then src_extent might look like [25, 31]. Note that |src_extent| contains 1 extra block than the |dst_extent|.

Used in: CowMergeOperation

• COW_COPY = 0

  identical blocks

• COW_XOR = 1

  used when src/dst blocks are highly similar

• COW_REPLACE = 2

  Raw replace operation

• optional uint32 block_size = 3

  (At time of writing) usually 4096

• optional uint64 signatures_offset = 4

  If signatures are present, the offset into the blobs, generally tacked onto the end of the file, and the length. We use an offset rather than a bool to allow for more flexibility in future file formats. If either is absent, it means signatures aren't supported in this file.

• optional uint64 signatures_size = 5

• optional uint32 minor_version = 12

  The minor version, also referred as "delta version", of the payload. Minor version 0 is full payload, everything else is delta payload.

• repeated PartitionUpdate partitions = 13

  Only present in major version >= 2. List of partitions that will be updated, in the order they will be updated. This field replaces the |install_operations|, |kernel_install_operations| and the |{old,new}_{kernel,rootfs}_info| fields used in major version = 1. This array can have more than two partitions if needed, and they are identified by the partition name.

• optional int64 max_timestamp = 14

  The maximum timestamp of the OS allowed to apply this payload. Can be used to prevent downgrading the OS.

• optional DynamicPartitionMetadata dynamic_partition_metadata = 15

  Metadata related to all dynamic partitions.

• optional bool partial_update = 16

  If the payload only updates a subset of partitions on the device.

• repeated ApexInfo apex_info = 17

  Information on compressed APEX to figure out how much space is required for their decompression

• optional string security_patch_level = 18

  Security patch level of the device, usually in the format of yyyy-mm-dd

Used in: DynamicPartitionMetadata

• required string name = 1

  Name of the group.

• optional uint64 size = 2

  Maximum size of the group. The sum of sizes of all partitions in the group must not exceed the maximum size of the group.

• repeated string partition_names = 3

  A list of partitions that belong to the group.

Metadata related to all dynamic partitions.

Used in: DeltaArchiveManifest

• repeated DynamicPartitionGroup groups = 1

  All updatable groups present in |partitions| of this DeltaArchiveManifest. - If an updatable group is on the device but not in the manifest, it is not updated. Hence, the group will not be resized, and partitions cannot be added to or removed from the group. - If an updatable group is in the manifest but not on the device, the group is added to the device.

• optional bool snapshot_enabled = 2

  Whether dynamic partitions have snapshots during the update. If this is set to true, the update_engine daemon creates snapshots for all dynamic partitions if possible. If this is unset, the update_engine daemon MUST NOT create snapshots for dynamic partitions.

• optional bool vabc_enabled = 3

  If this is set to false, update_engine should not use VABC regardless. If this is set to true, update_engine may choose to use VABC if device supports it, but not guaranteed. VABC stands for Virtual AB Compression

• optional string vabc_compression_param = 4

  The compression algorithm used by VABC. Available ones are "gz", "brotli". See system/core/fs_mgr/libsnapshot/cow_writer.cpp for available options, as this parameter is ultimated forwarded to libsnapshot's CowWriter

• optional uint32 cow_version = 5

  COW version used by VABC. The represents the major version in the COW header

• optional VABCFeatureSet vabc_feature_set = 6

  A collection of knobs to tune Virtual AB Compression

• optional uint64 compression_factor = 7

  Max bytes to be compressed at once during ota. Options: 4k, 8k, 16k, 32k, 64k, 128k

Used in: CowMergeOperation, InstallOperation, PartitionUpdate

• optional uint64 start_block = 1

• optional uint64 num_blocks = 2

Used in: PartitionUpdate

• required InstallOperation.Type type = 1

• optional uint64 data_offset = 2

  Only minor version 6 or newer support 64 bits |data_offset| and |data_length|, older client will read them as uint32. The offset into the delta file (after the protobuf) where the data (if any) is stored

• optional uint64 data_length = 3

  The length of the data in the delta file

• repeated Extent src_extents = 4

  Ordered list of extents that are read from (if any) and written to.

• optional uint64 src_length = 5

  Byte length of src, equal to the number of blocks in src_extents * block_size. It is used for BSDIFF and SOURCE_BSDIFF, because we need to pass that external program the number of bytes to read from the blocks we pass it. This is not used in any other operation.

• repeated Extent dst_extents = 6

• optional uint64 dst_length = 7

  Byte length of dst, equal to the number of blocks in dst_extents * block_size. Used for BSDIFF and SOURCE_BSDIFF, but not in any other operation.

• optional bytes data_sha256_hash = 8

  Optional SHA 256 hash of the blob associated with this operation. This is used as a primary validation for http-based downloads and as a defense-in-depth validation for https-based downloads. If the operation doesn't refer to any blob, this field will have zero bytes.

• optional bytes src_sha256_hash = 9

  Indicates the SHA 256 hash of the source data referenced in src_extents at the time of applying the operation. If present, the update_engine daemon MUST read and verify the source data before applying the operation.

Used in: InstallOperation

• REPLACE = 0

  Replace destination extents w/ attached data.

• REPLACE_BZ = 1

  Replace destination extents w/ attached bzipped data.

• MOVE = 2

  Move source extents to target extents.

• BSDIFF = 3

  The data is a bsdiff binary diff.

• SOURCE_COPY = 4

  On minor version 2 or newer, these operations are supported:

  Copy from source to target partition

• SOURCE_BSDIFF = 5

  Like BSDIFF, but read from source partition

• REPLACE_XZ = 8

  On minor version 3 or newer and on major version 2 or newer, these operations are supported:

  Replace destination extents w/ attached xz data.

• ZERO = 6

  On minor version 4 or newer, these operations are supported:

  Write zeros in the destination.

• DISCARD = 7

  Discard the destination blocks, reading as undefined.

• BROTLI_BSDIFF = 10

  Like SOURCE_BSDIFF, but compressed with brotli.

• PUFFDIFF = 9

  On minor version 5 or newer, these operations are supported:

  The data is in puffdiff format.

• ZUCCHINI = 11

  On minor version 8 or newer, these operations are supported:

• LZ4DIFF_BSDIFF = 12

  On minor version 9 or newer, these operations are supported:

• LZ4DIFF_PUFFDIFF = 13

• ZSTD = 14

Used in: PartitionUpdate

• optional uint64 size = 1

• optional bytes hash = 2

Describes the update to apply to a single partition.

Used in: DeltaArchiveManifest

• required string partition_name = 1

  A platform-specific name to identify the partition set being updated. For example, in Chrome OS this could be "ROOT" or "KERNEL".

• optional bool run_postinstall = 2

  Whether this partition carries a filesystem with post-install program that must be run to finalize the update process. See also |postinstall_path| and |filesystem_type|.

• optional string postinstall_path = 3

  The path of the executable program to run during the post-install step, relative to the root of this filesystem. If not set, the default "postinst" will be used. This setting is only used when |run_postinstall| is set and true.

• optional string filesystem_type = 4

  The filesystem type as passed to the mount(2) syscall when mounting the new filesystem to run the post-install program. If not set, a fixed list of filesystems will be attempted. This setting is only used if |run_postinstall| is set and true.

• repeated Signatures.Signature new_partition_signature = 5

  If present, a list of signatures of the new_partition_info.hash signed with different keys. If the update_engine daemon requires vendor-signed images and has its public key installed, one of the signatures should be valid for /postinstall to run.

• optional PartitionInfo old_partition_info = 6

• optional PartitionInfo new_partition_info = 7

• repeated InstallOperation operations = 8

  The list of operations to be performed to apply this PartitionUpdate. The associated operation blobs (in operations[i].data_offset, data_length) should be stored contiguously and in the same order.

• optional bool postinstall_optional = 9

  Whether a failure in the postinstall step for this partition should be ignored.

• optional Extent hash_tree_data_extent = 10

  The extent for data covered by verity hash tree.

• optional Extent hash_tree_extent = 11

  The extent to store verity hash tree.

• optional string hash_tree_algorithm = 12

  The hash algorithm used in verity hash tree.

• optional bytes hash_tree_salt = 13

  The salt used for verity hash tree.

• optional Extent fec_data_extent = 14

  The extent for data covered by FEC.

• optional Extent fec_extent = 15

  The extent to store FEC.

• optional uint32 fec_roots = 16

  The number of FEC roots.

• optional string version = 17

  Per-partition version used for downgrade detection, added as an effort to support partial updates. For most partitions, this is the build timestamp.

• repeated CowMergeOperation merge_operations = 18

  A sorted list of CowMergeOperation. When writing cow, we can choose to skip writing the raw bytes for these extents. During snapshot merge, the bytes will read from the source partitions instead.

• optional uint64 estimate_cow_size = 19

  Estimated size for COW image. This is used by libsnapshot as a hint. If set to 0, libsnapshot should use alternative methods for estimating size.

• optional uint64 estimate_op_count_max = 20

  Information about the cow used by Cow Writer to specify number of cow operations to be written

• repeated Signatures.Signature signatures = 1

Used in: PartitionUpdate, Signatures

• optional uint32 version = 1

• optional bytes data = 2

• optional fixed32 unpadded_signature_size = 3

  The DER encoded signature size of EC keys is nondeterministic for different input of sha256 hash. However, we need the size of the serialized signatures protobuf string to be fixed before signing; because this size is part of the content to be signed. Therefore, we always pad the signature data to the maximum possible signature size of a given key. And the payload verifier will truncate the signature to its correct size based on the value of |unpadded_signature_size|.

Used in: DynamicPartitionMetadata

• optional bool threaded = 1

• optional bool batch_writes = 2